Will Non-Original Chargers Damage My Phone? It's Enough to Read This Article

2024-03-14
If I don’t use the original charger, will my phone really be damaged? It's enough to read this article

I don’t know if this has happened to anyone

Every time someone asks me for a charger

There will be doubts in my heart

We are not the same model

Will it be worn out by me?



Having said that

Should I borrow it or should I borrow it?

But does this really matter?

Will it accelerate the aging of the charger?

Mobile phone charging encyclopedia: It is normal for the battery to heat up slightly in the later stages of charging. However, if the battery is obviously hot, it means that the charger failed to detect battery saturation in time, causing overcharging and damaging battery life.

What harm does mixing mobile phone chargers do to mobile phones?

This is very simple

Something went wrong when you were charging

The manufacturer will not be responsible

This is the greatest harm

Alright

Now let’s get down to business.

What harm does mixing chargers do to mobile phones?

In fact, today's chargers are as smart as mobile phones. The chargers that come standard in mobile phone packages basically use modern charging management technology, which means that they can output the corresponding current based on the information provided by the mobile phone, which generally does not cause harm. . So do you think it's okay?



If the charger and the fast charging protocol supported by the mobile phone do not match, the fast charging mode cannot be entered, which will cause low-power charging and require more time to fully charge. So you understand why sometimes charging is slow when using other people’s chargers.
Of course, it is best to use a matching charger, otherwise it will still cause some damage to the phone. It is worth noting that you should never use low-quality chargers, such as unbranded or uncertified chargers, as this is likely to cause damage to the mobile phone battery or other components.

Although many chargers can correspond to the interface

But if the current is different

Charging effect will be compromised

May also cause other adverse reactions

Rumors about mobile phone charging

Do I need to use the original charger to charge my mobile phone?
It is certainly correct to choose original chargers for mobile phone charging, but it is not necessary to use original ones. As long as they are matched and certified, they will also have protection mechanisms such as overshoot and short circuit.



Do you wait until your phone is almost out of battery before charging it?
Just charge and use as you go. Nowadays, mobile phone batteries are all lithium-ion batteries, which have no memory effect. If the mobile phone is discharged and then recharged, it will damage the chemical activity inside the lithium-ion battery. When the phone's power drops below 20% or even automatically shuts down, it actually does a lot of damage to the battery, causing problems such as slow charging and reduced battery life, so there is no need to wait until the phone runs out of power before charging.



Can turning off the background save power?
If you close the background that has not been used for a long time, it can indeed reduce some power consumption. If it is a software that is opened more frequently, there is actually no need to clean the background. Re-opening it will still consume power, or even consume more power.



Can I continue to charge my phone if it gets hot while charging?
This can actually be felt by touch. If it is abnormally hot and continues to be hot, it is recommended to stop charging. Although the mobile phone has a protection mechanism, if the temperature is too high for a long time, it will affect the life of the mobile phone battery and shorten the battery life of the mobile phone.



Have you learned everything?

ZONSAN is a leading wholesale mobile charger supplier with over 13 years of industry experience. We specialize in a wide range of chargers, including wall chargers, GaN chargers, USB chargers, and more. Our chargers cover power outputs from 5W to 240W and support PD/QC/PPS protocols. With certifications including CE, ROHS, CB, and FCC, our chargers meet the highest standards of quality and safety.The following are our hot-selling models:

KC CE CB PD3.1 USB-C 140W GaN Desktop Charger for iPhone Samsung Laptop Tablet | 4U21T KC CE CB PD3.1 USB-C 140W GaN Desktop Charger for iPhone Samsung Laptop Tablet | 4U21T Output:C1/C2:5V/3A,9V/3A, 12V/3A, 15V/3A,20V/5A,28V/5A(140W) C3:5V/3A,9V/2.22A, 12V/1.67A(20W) A:5V/3A,9V/2A, 12V/1.5A(18W) C1+C2:65W+65W(130W Max) C...
Read More
GaN 100W 2C1A 3-Port Wall Fast Charger for Smart Phone Tablet Laptop | ZX-3U28T GaN 100W 2C1A 3-Port Wall Fast Charger for Smart Phone Tablet Laptop | ZX-3U28T GAN technology charger USB Port: 3 Port Input:AC 100-240V 50-60Hz Power:100W Output: C1:5V/3A,9V/3A,12V/3A, 15V/3A,20V/5A(100W) PPS:3.3-16V/3A,3.3-...
Read More
65W PD/PPS + 30W PD/PPS + 18W QC Charger | ZH-3U24T 65W PD/PPS + 30W PD/PPS + 18W QC Charger | ZH-3U24T Output USB-C1/C2: 5V3A,9V3A,12V3A,15V3A,20V3.25A(65W) PPS:3.3V-11V/5A; Output USB-A : 5V/4.5A,4.5V/5A,9V/3A,12V/2.5A 20V/1.5A (30W) USB-C1 +C2 output:...
Read More